Back to all

Improve Gas Mileage!


Protect your vehicle… for LIFE!

Not sure if you want to invest in a BG Automotive Maintenance Service? The Lifetime BG Protection Plan will help you make that decision.

The high quality BG Automotive Maintenance Services listed below are backed by the Lifetime BG Protection Plan. That means, for example, if you get a BG Fuel System Service, repair of the lubricated parts in your Fuel System system will automatically be covered for up to $4,000!* How’s that for peace of mind with your investment?

To maintain the lifetime protection, all you have to do is stick to the service schedule listed below!

BG Fuel/Air Induction Service
The BG Fuel/Air Induction Service covers gasoline fuel systems.
Service interval: Within 15,000 miles/25,000 km of the previous service
Maximum reimbursement: Plan 1: $4,000 US; Plan 2: $2,000 US

The Lifetime BG Protection Plan covers seven major systems: fuel, engine, transmission, drive line, cooling, power steering and brakes.

U.S. and Canadian Lifetime BG Protection Plan coverage:

To quality for full coverage (Plan 1), your first BG Automotive Maintenance Service must be performed before your vehicle reaches 36,000 miles (60,000 km). But don’t worry, if you’re a late joiner, you can still enjoy some of the benefits with Plan 2. To qualify for 50 percent coverage (Plan 2), your first BG Automotive Maintenance Service must be performed within 36,001 – 75,000 miles (60,001 – 120,000 km).

BG Air Intake System Cleaner quickly removes pesky deposits that can accumulate in the air throttle body assemblies and plenums.

Heavy deposits are common in the air intake because to help control emissions, noxious exhaust gases and crankcase vapors are captured and fed back into the air intake system. Gummy substances contained in these vapors combine with dirt and form deposits. These deposits will substantially reduce airflow, disrupting the critical air/fuel ratio that is essential to engine operation and fuel efficiency. Drivability problems such as rough idle, poor performance, and increased exhaust emissions result from heavy deposit buildup.

BG Air Intake System Cleaner reduces harmful exhaust emissions and restores engine performance. As an integral part of the BG Fuel/Air Induction Service, professional-use BG Air Intake System Cleaner is used with the BG AIS Cleaning Tool Kit, PN 9206, and provides a complete “on engine” cleaning of the air throttle body assembly and plenum area of the engine.




BG 44K® is the ultimate tank-treatment fuel system cleaner. It’s 11 ounces of high quality detergents and additives that you pour right into the gas tank to restore performance and gas mileage. It vanquishes deposits in combustion chambers, intake manifolds, ports and on valves and restores flow in fuel injectors. Basically, it cleans the entire fuel system!

Gasoline quality is inconsistent. And when gas at the pump is poor quality, it can cause deposit buildup, inefficient ignition and combustion and poor power output. To make matters worse, small, high output engines are extremely sensitive to deposits that build up on fuel injectors, intake ports, on intake valves and in combustion chambers. Even small amounts of deposits cause increased exhaust emissions, reduced fuel economy, drivability problems and engine knock.

BG 44K® is formulated to safely and rapidly clean the entire fuel system, including fuel injectors, intake valves, ports, fuel filters and combustion chambers. Because it provides efficient removal of upper engine deposits, BG 44K® reduces problems caused by deposit buildup such as engine surge, stalling, stumble, hesitation and power loss. BG 44K® technology has been proven to increase combustion quality and power output. BG 44K® will provide quick cleanup of coked fuel injectors and corrosive deposits on the Fuel Sending Unit. It is compatible with all fuel system materials, alcohol-blended fuels and common fuel additives.



BG Fuel Injection System Cleaner removes rock-hard carbon deposits from fuel injectors. It corrects the injector spray and balances fuel/air ratio, ultimately helping to restore gas mileage.

Modern vehicles, like those with gasoline direct injection, are finely tuned and extremely sensitive to
 deposits that build up in fuel injectors, intake valves and ports. Accumulated residues, mostly from gasoline, can cause drivability problems such as: hesitation, misfire, stumble, rough idle, poor gas mileage and performance loss.

BG Fuel Injection System Cleaner is especially effective with rock hard fuel system deposits. As an integral part of the BG Fuel/Air Induction Service, it pre-soaks deposits which allows BG 44K® to provide an even more effective cleanup. Although it’s a powerful professional-use product, BG Fuel Injection System Cleaner is not harmful to any fuel system components including gaskets, hoses, metals, fuel tank bladders, fuel pumps, O-rings, etc.







Need Service?

Request a Quote

More articles from March Tire And Auto Service, Inc.

Save Money on Gas with These 5 Habits!

Save Money on Gas with these 5 Habits Your driving habits and vehicle maintenance (or lack of maintenance) can impact your vehicles fuel efficiency. Here are a few tips for saving fuel and funds: ... More

Summer Car Care Tips!

Hit the Road Jack! But before you go..."summerize" your car for a smooth trip! The combination of summer heat, unexpected delays during road construction, towing a boat or camper, and long road trips can put a ... More

Tire Safety & Maintenance

Tire Safety & Maintenance Tires are an important safety feature on your car. Your tires are the only points where your vehicle maintains contact with the road and they are one of the two things make your ... More